ZC-LR Two-Box Cold and Hot Thermal Shock Test Cha | RFQ Sourcing Details
Laboratory Instruments · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Laboratory Instruments. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The ZC-LR cold and hot thermal shock test chamber is designed to evaluate specimens under rapid changes between high- and low-temperature environments. Its two-box structure uses separate hot and cold zones, with a hanging basket transferring the test specimen between them.
The equipment can also operate as a separate high-temperature or low-temperature chamber. The listed configuration has a 150 L inner chamber made from SUS304 stainless steel. The available model family includes ZC-TH50, ZC-TH80, ZC-TH150, and ZC-TH225.
Published inner chamber dimensions range from 350 × 400 × 350 mm to 500 × 750 × 600 mm, depending on model. Cooling choices include air cooling and water cooling, although larger configurations are listed with water cooling only.
Published operating data includes high-temperature settings from +60°C to +150°C and low-temperature settings that vary by configuration. High-temperature tank settings extend to +200°C, while listed low-temperature tank settings extend as low as -70°C.
The stated impact recovery time from -60°C to +150°C is approxima r uses PID balanced temperature and humidity control, with constant-value and programmed test options.
Listed protective features include a leakage-protection switch, compressor overload protection, refrigerant high-pressure protection, phase-sequence protection, temperature and humidity air-incineration protection, and a fault alarm system.
The specified electrical supply is three-phase 380 VAC +10%, five-wire, at 50/60 Hz. Required power depends on chamber volume and the selected low-temperature configuration. The equipment is presented for thermal-shock testing of batteries, electronics, new-energy products, and plastics.
Additional listed industry contexts include chemical, medical, textile, automotive, and aerospace products. Published compliance references include low-temperature, high-temperature, temperature-variation, and temperature-impact test methods under the listed GB/T, IEC, and GJB standards.
Before procurement, the buyer should confirm the exact model, usable chamber dimensions, low-temperature limit, cooling method, power demand, refrigerant and compressor configuration, and required test program.
The buyer should also request documentary evidence for any required certification or standards compliance and verify whether the approxima
ZC-LR | Applications and Buyer Notes
ZC-LR is organized as a sourcing-ready Laboratory Instruments reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time ques
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Laboratory InstrumentsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- ZC-LRBased on visible page data; confirm exact value in the RFQ.
- Refrigerant
- R404a/R23Based on visible page data; confirm exact value in the RFQ.
- Cooling method
- Air c ing or water c ing, depending on modelBased on visible page data; confirm exact value in the RFQ.
- Transfer structure
- Dynamic hanging-basket transfer between two boxesBased on visible page data; confirm exact value in the RFQ.
- Listed model family
- ZC-TH50, ZC-TH80, ZC-TH150, ZC-TH225Based on visible page data; confirm exact value in the RFQ.
- Impact recovery time
- ApproximaBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 0 001g High Accuracy Laboratory Grade Analytical Balance For Gold Jewelry Measurement Analytical BThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Testing And Measurement Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom And Lab Furniture categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laboratory Instruments categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Sample Preparation And Consumables categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 98 Low Humidity Type Temperature Humidity Environmental Climate Test Chamber For Lab LaboratoThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16500rpm High Speed Capillary Hematocrit Centrifuge For Hospital Medical Use Hematocrit CentrifugeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 3e Blood Harvest Prp Centrifuge Kit For Lab 3e Blood Harvest Prp Centrifuge Kit And Prp CentrifugeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 6 In 1 Drinking Water Quality Tester Tds Cod Toc Ec Multifunction High Quality Precision Digital WatThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 90 Safety Storage Cabinet Safety Cabinet Flammable Safety Cabinet Flammable Cabinet And 110 GallonThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Advanced Cup Temperature Shock Test Chamber For Gas ImpactThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
M056 Fabric Thermal Resistance and Tog Value TesterRequest Quote
ZC-300B High Current Generator and Primary Injection Tester, 50–30,000 ARequest Quote
ZC-DL Series Electronic Single-Column Tensile Testing MachineRequest Quote
600 × 400 mm Corrosion-Resistant Laboratory Electric Hot PlateRequest Quote
SH-4C Digital Ceramic Hotplate Magnetic Stirrer, 5 LRequest Quote
SH-II-4C Digital Ceramic Hotplate Magnetic Stirrer, 5 LRequest QuoteLabInstSource related sourcing paths
Sample Preparation and Lab Basics
LabInstSource procurement phrases
LabInstSource related product samples
We are a manufacturer specializing in the R&D of laboratory electric heating equipment. Our process is unique worldwide,...
Sample Preparation and Lab Basics Semi-Exhaust Type Biological Safety Cabinet Machine Medical Equipment - Medical Equipment and MedicaSemi-exhaust type biological safety cabinet school laboratory 1.Description The biosafety cabinet protects both human sa...
Sample Preparation and Lab Basics Etcolabs PP Fume Hood - Compliant with En 14175 Ashrae mm - 2026 Fume Hood, En 14175 FuIn the domain of laboratory safety, our fume hoods stand as indispensable protectors, catering to the rigorous demands o...
Sample Preparation and Lab Basics Laboao InUsing American Marlow semiconductor refrigeration sheet, the maximum temperature change rate is more than 5 degrees per ...
Sample Preparation and Lab Basics Erun-Sp9-B6 High-Accuracy Turbidimeter Laboratory-Grade Tool for Industrial Water Quality TestingIntroduction This instrument features 16 channels for the optical method and can measure over 60 parameters, as well as ...
Sample Preparation and Lab Basics Cordial Lab 5-5000ml Borosilicate 3.3 Glass Low Form Beaker for Lab Use - Glass Beaker and Low Form: With Spout and graduations 4. Color: Clear-to-read white enamel graduated scale. 2) Borosilicate tubing made and machi...