LabInstSourceLab instruments, testing equipment, balances, microscopes, cleanroom products, and technical sourcing support for global buyers.
Cable Partial Discharge Test Equipment IEC 60270 Partial Discharge Measurement System
Hardness Testers

Cable Partial Discharge Test Equipment IEC 60270 | RFQ Sourcing Details

Hardness Testers · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryHardness Testers
Unitset
CategoryHardness Testers
AvailabilityInquiry required
Updated2026-05-26

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Hardness Testers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

Cable Partial Discharge Test Equipment IEC 60270 Partial Discharge Measurement System The system is consisted by below units: PD Free Testing Control Table EPTC-15kVA 1 set Gas Type PD Free Testing Transformer EPDW-15kVA/150kV 1 set Isolation Transformer EPLB-15kVA 1 set Coupling Capacitor FRC-150kV 1 set Protective Resistor EPGR-150kV 1 set Partial Discharge Detector EPJF-C 1 set (Including PD Free Calibrator & Impedance Unit) PD Free Testing Control Table EPTC-15kVA 1 set Manual controlling.

High anti interference ability. Real time monitoring High voltage (HV) voltage, Low voltage (LV) current, timing. Full protection functions: over-current, zero-starting, sound light alarm, power switch protection, emergency stop button.

New type over-current relay, more accurate and reliable, to ensure the safety of the people and device. Display: Digital. The control unit: Table type Both control unit and HV unit are mounted with wheels, easy to move. Power: AC 380V ±10%, 50.

Hz Capacity: 15kVA Rated output Voltage: AC 0-400V Rated output current: 37.5A HV voltmeter range: AC 0-150kV Accuracy: 1.5% of the reading±1digit (F.S) LV ammeter range: 0-38A Accuracy: 1.5% of the reading±1 digit (F.S) Timing range: 0-9999S Metering: Pointer and digital display Weight: 120kg Dimension: 530mm(L)*400mm(W)*820mm (H including castors) Gas Type PD Free Testing Transformer EPDW-15kVA/150kV 1 set SF6 gas with high insulation strength is used as insulation medium.

Small size, light weight, high technology level, beautiful appearance, convenient transportation. Due to the arc extinguishing performance of SF6 gas and its special process structure, its local discharge is small and ≤ 5pc under rated voltage. The test process is simple and intuitive, and the operation is convenient.

It can effectively eliminate the clutter interference in the power supply. It adopts automatic control technology, with high degree of automation and strong anti-interference ability. Adopt fast electronic protection device, high reliability.

Rated Capacity: 15kVA Input voltage: 400V Output voltage: 0-150kV PD volume under rated voltage ≤ 5PC Output current 100mA Voltage accuracy AC 1.5% Power distortion < 5% Insulation medium SF6 Gas Weight: 120kg Dimension: 450*450*(H)1300 mm Partial Discharge Analyzer Model: EPJF-C 1 Set General Information: The EPJF-C partial discharge detector (hereinafter referred to as PD)

Cable | Applications and Buyer Notes

Cable is organized as a sourcing-ready Hardness Testers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Hardness TestersBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryHardness Testers
Unitset

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

LabInstSource related sourcing paths

LabInstSource procurement phrases

LabInstSource related product samples