Automatic Backwash Drip Irrigation Filter | RFQ Sourcing Details
Laboratory Instruments · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Laboratory Instruments. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
Product structure 1. Automatic drain valve 2. Electric motor 3. Pressure indicator 4. Water outlet 5. Water inlet 6. Screen 7. Suction nozzle Product principle The water flows through the screen and the particles are retained on the inside of the screen of the filter element.
The filtered water then flows out through the outlet. Self-cleaning mode can be started by pressing, timing or manual three ways, following the principle of pressure difference.
When the internal and external pressure difference reaches the set value, the self-cleaning mode starts.Drain pipe hydraulic valve open, sucking the scanner to produce negative pressure suction nozzle inside, absorbing impurities, at the same time sucking scanner in under hydraulic motor along the inside surface mesh do reciprocating screw, movement, no cleaning blind area, impurities by the discharge outlet.
The cleaning time of self-cleaning filter is set by the controller in advance, the drain valve is closed after cleaning, and little water loss in cleaning process.
Technical parameters ≥ Single maximum filtration flow up to 1200m3 / h ≥ Filter optional drilling (4000-800μm), wedge (1000-50μm) woven composite (800-20μm) ≥ minimum working pressure ≥ 0.1. Mpa (sewage valve for the electric ball valve) ≥0.18.
Mpa (discharge valve for the electromagnetic diaphragm valve) ≥ Maximum working presure ≤ 1.6MPa (special customizable) ≥ Operating temperature ≤ 65 ºC ≥ Power: 380V / 50.
Hz ≥ Cleaning method: suction type ≥ Cleaning time: 10-200 seconds adjustable ≥ Control: pressure, time, manual and PLC Filter material Shell: carbon steel, 304 stainless steel, 316L stainless steel Screen: 304 stainless steel, 316L stainless steel Drain valve, cast iron,copper,stainless steel,PVC,nylon Controller: PVC, aluminum Seal ring: EPDM rubber Suction: stainless steel, PVC Loss of pressure table DLX-FW series self-cleaning filter specification table Model Water in/outlet (mm) L (mm) L1 (mm) L2 (mm) H (mm) Power (KW) Max flow (m3/h) Weight (Kg) DLX-FW- DLX-FW- DLX-FW- DLX-FW- DLX-FW- DLX-FW- DLX-FW- DLX-FW- Packing&Shipping Company Infom
Automatic | Applications and Buyer Notes
Automatic is organized as a sourcing-ready Laboratory Instruments reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Air PurifiersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Type
- Industrial/IrrigationBased on visible page data; confirm exact value in the RFQ.
- Model
- Water in/outlet (mm) L (mm) L1 (mm) L2 (mm) H (mm)Based on visible page data; confirm exact value in the RFQ.
- Power
- 380V / 50Hz ≥ Cleaning method: suctionBased on visible page data; confirm exact value in the RFQ.
- Style
- HorizontalBased on visible page data; confirm exact value in the RFQ.
- Usage
- Environmental ProtectionBased on visible page data; confirm exact value in the RFQ.
- Origin
- Changsha, Hunan, ChinaBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 0 001g High Accuracy Laboratory Grade Analytical Balance For Gold Jewelry MeasurementThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom And Lab Furniture categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laboratory Instruments categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Sample Preparation And Consumables categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Testing And Measurement Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom Monitoring Systems sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom Product Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Digital Inspection Microscopes sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10 Year Warranty Labbench With Sefa Ce Certificate High Pressure LaminateThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Bibo Filter SystemThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Corrugated Carton Box Compression Strength Tester Bct Testing MachineThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
LabInstSource related sourcing paths
LabInstSource procurement phrases
LabInstSource related product samples
Features PW software in measurement. With just one click, you can get real and objective inspection data, helping you to...
Sample Preparation and Lab Basics Optical Surface Tester and. Overview Product Parameters Certifications Packaging & Shipping FAQ Overview . Model NO. PW-WD300 Max Diameter of Work...
Sample Preparation and Lab Basics Digital Compression Strength Tester for Corrugated Carton Test and Box Compression Test. Overview Features Certifications FAQ Overview . Model NO. PW-6609A Certification CE, ISO, SGS Warranty 1 Year Pressure...
Sample Preparation and Lab Basics Reliable Constant Temperature and Humidity Test Chamber (150L) with CE Approved. Overview Detailed Photos Product Parameters Certifications Packaging & Shipping FAQ Overview . Model NO. PW-CTH150-40 ...
Sample Preparation and Lab Basics Advanced Programmable Energy-Efficient Temperature & Humidity Control Test Chamber for Lab with CEIndustry Temperature Humidity Environment Stability Climate Test Chamber, used for material performance test under diffe...
Sample Preparation and Lab Basics High Precision and Safety Composite Salt Spray Test Chamber for Laboratory Equipment. Overview Features Product Parameters Certifications FAQ Overview . Model NO. PW-SAC series Certification CE, ISO, SGS ...





