LabInstSourceLab instruments, testing equipment, balances, microscopes, cleanroom products, and technical sourcing support for global buyers.
Advanced Programmable Energy-Efficient Temperature & Humidity Control Test Chamber for Lab with CE
Lab Glassware

Advanced Programmable Energy-Efficient Temperatur | RFQ Sourcing Details

Lab Glassware · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryLab Glassware
Unitset
SizeW78*H157*D105cm Temperature Range-40~150ºC
ModelCTH100 PW-CTH-150 PW-CTH-225 PW-CTH-408 PW-CTH-800 PW-CTH-1000
powersolutions and various plug types. Product Attributes
OriginChina
Material1.2mm Thick SUS#304
Model NoPw-Cth100-40
CategoryLab Glassware
AvailabilityInquiry required
Updated2026-06-01

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Lab Glassware. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

Industry Temperature Humidity Environment Stability Climate Test Chamber, used for material performance test under different environment, such as heat, cold, moisture, heat and moisture, mainly applied in electronics, electrical appliances, ce and other industries.

Features 1,The test requirements that need to reach below -40 degrees will use a cascade double compression refrigeration system.

When the test is above -20 degrees, only one compressor will be started to work with a smaller power heating tube for inching heating, which saves electricity and water;( If single-stage refrigeration is used, the compressor will be equipped with high-power full-process refrigeration, and the refrigeration capacity is also large, and a higher-performance heating tube is required to balance, so it consumes electricity and water.

2,The sink is made of special materials with low thermal conductivity and no water droplets on the surface (such as metal materials will form water droplets on the surface, which will easily wet the sample and affect the test results), and is equipped with a diversion device.

If the sink appears When the internal pressure is too high or the water level is too high, it will flow into the humidification barrel through the diversion hole. 3,The cascade dual-compression refrigeration system can easily meet the test requirements of low temperature -40 degrees and below.

When the single-stage refrigeration reaches -38 degrees, it will be difficult to drop to -40 degrees.

Advanced | Applications and Buyer Notes

Advanced is organized as a sourcing-ready Lab Glassware reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Lab GlasswareBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Size
W78*H157*D105cm Temperature Range-40~150ºCBased on visible page data; confirm exact value in the RFQ.
Model
CTH100 PW-CTH-150 PW-CTH-225 PW-CTH-408 PW-CTH-800 PW-CTH-1000Based on visible page data; confirm exact value in the RFQ.
power
solutions and various plug types. Product AttributesBased on visible page data; confirm exact value in the RFQ.
Origin
ChinaBased on visible page data; confirm exact value in the RFQ.
Material
1.2mm Thick SUS#304Based on visible page data; confirm exact value in the RFQ.
Model No
Pw-Cth100-40Based on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryLab Glassware
Unitset
SizeW78*H157*D105cm Temperature Range-40~150ºC
ModelCTH100 PW-CTH-150 PW-CTH-225 PW-CTH-408 PW-CTH-800 PW-CTH-1000
powersolutions and various plug types. Product Attributes
OriginChina
Material1.2mm Thick SUS#304
Model NoPw-Cth100-40
Warranty1 Year
Model NO.CTH100-40
TrademarkPW
Inner SizeW50*H50*D40cm
Cooling RateApprox 1ºC/ Min
Heating Rate3ºC/Min
Package Size78.00cm * 157.00cm * 105.00cm
Power Supply220V
Power supplyAC 1ψ220V;3ψ380V 60/50Hz
CertificationCE, ISO, SGS
CustomizationAvailable
External SizeW78*H157*D105cm
Specification100L
Heating systemSUS# Stainless steel high-speed heater
Humidity Range20%Rh-98%Rh
Other componentsVacuum glass observation window
Internal Material1.2mm Thick SUS#304
Temperature Range40~150ºC
Transport PackageWood
Circulation systemCentrifugal fan air circulation system
After-sales ServiceSupport
Insulation materialRigid Polyurethane foam
Production Capacity1000pieces/Year
Humidity Fluctuation±2%Rh
Temp.humi.resolution0.01ºC;0.1%RH
Temp.humi.uniformity±2ºC;±3% empty loading after stablize for 30mins ±2ºC;±3%RH
Customization serviceNon-standard or special requirements are all welcome
Humidification systemElectrothermal steam humidification
Temp.humi.fluctuation±0.3ºC;±0.5%RH
Testing humidity range20%RH~98%RH
Temperature Fluctuation0.5ºC
Safety protection deviceOverheat protection circuit breaker
Interior chamber materialSUS#304 Stainless steel
Testing temperature range0ºC-20ºC-40ºC-70ºC~150ºC
Heating&cooling time ºC/minHeat-up:3ºC/min-down:1ºC/min
Inner chamber size W×H×D(cm)50×50×40 50×60×50 60×75×50 80×85×60 100×100×80 100×100×100
Exterior chamber size W×H×D(cm)78×157×105 78×167×115 88×185×115 108×195×125 128×210×145 128×210×165

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

LabInstSource related sourcing paths

LabInstSource procurement phrases

LabInstSource related product samples