STD-A Dielectric Constant Measuring Instrument Pe | RFQ Sourcing Details
Clean Benches · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Clean Benches. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
STD-A Dielectric Constant Measuring Instrument Permittivity Tester Description Dielectric loss and dielectric constant are important physical properties of various ceramics such as electrical porcelain, device porcelain, capacitors, and composite materials, etc.
By measuring the dielectric loss tangent (tanδ) and dielectric constant (ε), one can further understand various factors affecting dielectric loss and dielectric constant, providing a basis for improving the performance of materials.
The basic principle of the instrument is to adopt the high-frequency resonant method, and it provides a universal, multi-purpose, and multi-range impedance testing. It uses a single-chip computer as the instrument's control, with automatic conversion of Q value range, numerical display, and other new technologies.
It improves the tuning circuit, reducing the residual inductance of the tuning test circuit to the minimum, and retains the automatic amplitude stabilization technology in the original Q meter, making the new instrument more convenient to use and the measurement values more accurate.
The instrument can measure the Q value of high-frequency inductors or resonant circuits, the inductance and distributed capacitance of inductors, the capacitance and dielectric loss tangent value of capacitors, the high-frequency dielectric loss of electrical materials, the effective parallel and series resistances of high-frequency circuits, and the characteristic impedance of transmission lines under higher testing frequency conditions.
This instrument is used by research institutions, schools, factories and other units for the application research on the performance of inorganic non-metallic new materials. Standard GB/T Product Parameters STD-A Dielectric Constant Measuring Instrument Permittivity Tester Feature Specification 1.
Q Factor Measurement a. Q Range 2 to 1023 b. Ranges 30, 100, 300, 1000 (Auto/Manual ranging) c. Error Frequency: 10k. Hz-10MHz Intrinsic Error: ≤5% ±2% FS Operating Error: ≤7% ±2% FS Frequency: 10MHz-70MHz Intrinsic Error: ≤6% ±2% FS Operating Error: ≤8% ±2% FS 2. Inductance Range 1nH to 8.4H 3.
Capacitance Measurement Direct Range 1pF to 520pF Main C Adjust 30pF to 550pF Accuracy ≤100pF: ±1pF >100pF: ±1% 4. Signal Source Freq. Range 10k. Hz to 70MHz Channels CH1: k. Hz CH2: k. Hz CH3: MHz CH4: 10-70
STD-A | Applications and Buyer Notes
STD-A is organized as a sourcing-ready Clean Benches reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions bef
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Clean BenchesBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Feature
- Specification 1. Q Factor Measurement a. Q Range 2 to 1023 b. Ranges 30, 100, 30Based on visible page data; confirm exact value in the RFQ.
- frequency
- conditions. This instrument is used by research institutions, schools, factoriesBased on visible page data; confirm exact value in the RFQ.
- application
- research on the performance of inorganic non-metallic new materialsBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom And Lab Furniture categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laboratory Instruments categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Sample Preparation And Consumables categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Testing And Measurement Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 0 001g High Accuracy Laboratory Grade Analytical Balance For Gold Jewelry Measurement Analytical BThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom Monitoring Systems sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom Product Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Digital Inspection Microscopes sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16500rpm High Speed Capillary Hematocrit Centrifuge For Hospital Medical Use Hematocrit CentrifugeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Advanced Cup Temperature Shock Test Chamber For Gas ImpactThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Aoda 2700 Nir Spectrometer For Food Feed And Grain AnalysisThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Environmental Humidity Cabinet Climatic Test Chamber Constant High and Low Temperature TesterRequest Quote
WM Unglazed Tile Abrasion Resistance Tester Brittle Materials Test EquipmentRequest Quote
Hot Sale Biological Analysis Laminar Air Flow Hood with Heap Filter Horizontal Clean Bench Hood - ClRequest Quote
Lab Clean Bench Horizental/ Vertical Laminar Flow Cabinet - Clean Bench and Super Clean BenchRequest Quote
Dust Free Clean Room Laboratory Furniture Vertical Ventilation Laminar Flow Cabinet Air Flow Bench ERequest QuoteHot Sale Biological Analysis Laminar Flow Hood with Heap Filter Horizontal Clean Bench Hood - LaminaRequest QuoteLabInstSource related sourcing paths
Cleanroom and Testing Consumables
LabInstSource procurement phrases
LabInstSource related product samples
Type Static Pass Box Dynamic Pass Box Model PH-01 PH02 PH-03 PHD-01 PHD-02 PHD-03 External size
Cleanroom and Testing Consumables Etcolabs PP Fume Hood - Compliant with En 14175 Ashrae mm - 2026 Fume Hood, En 14175 FuIn the domain of laboratory safety, our fume hoods stand as indispensable protectors, catering to the rigorous demands o...
Cleanroom and Testing Consumables Mechanical Battery Impact Test Machine - 2026 Vertical Impact Test Bench, Battery Impact Test MachinThis machine is a fully automatic motor lifting impact testing system. It is an impact testing equipment with novel desi...
Cleanroom and Testing Consumables Erun-Sp9-B6 High-Accuracy Turbidimeter Laboratory-Grade Tool for Industrial Water Quality TestingIntroduction This instrument features 16 channels for the optical method and can measure over 60 parameters, as well as ...
Cleanroom and Testing Consumables ISO 1520 Auto Cupping Tester Cup Drawing Tests Instrument Ga-6006 Lab Price - Cupping Tester and CupISO 1520 Auto Cupping Tester Cup Drawing Tests Instrument GA-6006 Lab Price Use Used for testing the extension and damag...
Cleanroom and Testing Consumables Impact Test Bench Impact Test Machine - Impact Test Bench and Impact Testing EquipmentThe impact table is used for impact testing of various products, and the functional adaptability and structural integrit...