LabInstSourceLab instruments, testing equipment, balances, microscopes, cleanroom products, and technical sourcing support for global buyers.
DH-300L Laboratory Electronic Liquid Density Meter For Crude Diesel Oil And Fuel
Incubators

DH-300L Laboratory Electronic Liquid Density Mete | RFQ Sourcing Details

Incubators · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryIncubators
Unitset
CategoryIncubators
AvailabilityInquiry required
Updated2026-05-26

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Incubators. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

DH-300L Laboratory Electronic Liquid Density Meter For Crude Diesel Oil And Fuel ------Direct reading data, Shorter measuring time, Density resolution 0.001 g/cm3 Standards In accordance with Archimedes principle, GB/T 611,.GB/T11540,GB/T12206,GB/T5518 standards etc.

Combine Archimedes principle with modern electronics technique of DH-300L;Digital display liquid desimeter;The data can be read directly with high measurement accuracy;The operation is more easy and get away from the influence of external factor and temperature compared with traditional wechsler balance method and pycnometer method;It can be applied to the field of quality management, cost control,formula researching and so on.

Also,the solvent,adhesive,paint,pitch,resin,chemical oils,edible oil,food additives,drink,dairy products can be measured.

Specification Density resolution: 0.001 g/cm3 Maximum weight:300g Minimum weight:0.005g Measuring range: g/cm3 Functions It has the function of automatic zero tracking and removaling tare weight in the whole process. It has the high limit and low limit, equipped with buzzer.

when the measured specific gravity value exceeds the set value, the display will prompt HI. And the valus under the set value, the display will prompt LO. It can help determine whether the measured liquid proportion is qualified.

When weighing precision 0.001g, the function of compensating the error caused by air buoyancy is added. Can directly show the solution concentration by the specific gravity of testing solution. Coordinate with operation of thermostatic tank to measure the proportion with required temperature.

Density of samples with temperature from normal to 100 centigrade can be measured. Features 1. Digital display and direct reading, without manual calculation.Read the sample density by one procedure. Repeatedly continuous rapid measurement can be worked. 2.

Standard blocks can be selected according to different liquids (ordinary weight/stainless steel weight /tef lon acid and alkali resistant weight) 3. Adopt the original German HBM sensor for accurate measurement, simple operation, stable and durable. 4. Any weight can be as the standard value, easy to operate. 5.

Adopt completed windproof and dustproof cover, which makes the structure more convenient and durable. 6. Adopt completed stainless steel measuring hook. 7. It can be connected to the PC and

DH-300L | Applications and Buyer Notes

DH-300L is organized as a sourcing-ready Incubators reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions befo

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
IncubatorsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryIncubators
Unitset

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

LabInstSource related sourcing paths

LabInstSource procurement phrases

LabInstSource related product samples