LabInstSourceLab instruments, testing equipment, balances, microscopes, cleanroom products, and technical sourcing support for global buyers.
Automatic Office Equipmentoffice Chair Backrest Test Machine
Moisture Analyzers

Automatic Office Equipmentoffice Chair Backrest T | RFQ Sourcing Details

Moisture Analyzers · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryMoisture Analyzers
Unitset
CategoryMoisture Analyzers
AvailabilityInquiry required
Updated2026-05-26

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Moisture Analyzers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

Automatic Office Equipment Office Chair Backrest Test Machine D ESCRIPTION The machine is designed to test office chair arm ( vertical and horizonal test ) and back strength. It with PLC controller, touch screen interface to input test parameters, test force and times can be set .

GENERAL SPECIFICATIONS Machine Dimensions: (W x D x H) 2450mmx1000mmx2250mm Compressed air requirement: 6-7kg/ cm2 Electrical Consumption: 0.2KW Power supply source: single-phase, AC220V ± 10%, 50/60.

Hz (can be appointed) Gross Weight: 380kg APPLICATION STANDARDS : BIFMA X5.1-2017 section 5, 6, 12, 13, 14, 15 STANDARD FEATURES Items Description Capacity 2kN Imported sensor (Durability test) 5kN Imported sensor (Strength test) Load weight 109 kg (one set) Test speed Durability test 5 ~ 20 times /min, Strength test 450mm/min T est force value Durability test 450N ~ 1.5kN (cylinder driven) Strength test MAX 1.9kN (motor driven) Display mode Touch screen interface Control mode PLC control Setting time 1 ~ 999,999 times (adjustable) Overall dimensions 2450mmx1000mmx2250mm (L*W*H) Weight About 250 kg Air Acuity 0.6 MPa Power 1∮, AC 220V, 50 Hz.

About 200W Main test items Chair back fatigue test and damage test, Chair armrest horizontal and vertical fatigue test and damage test CONFIGURATION: C onfiguration Name Details Items Documents Operation Manual*1 piece;Factory Inspection Report*1 piece;Operation Video in USB flash disk with machine*1 piece Power line 1 piece Plug 1 piece(Per your local plug standard) USB flash disk 1G capacity *1 piece Force sensor 2KN Capacity *1 piece 5KN Capacity *1 piece Weights 109kg*1 set Air pipe 1Φ 8 tracheal * 1 piece Clamps Chair seat fixing fixture *1 piece Handrail vertical clamp *1 piece Pull back fixture *1 piece Chair foot pressing block *1 piece Ribbon pressing block *1 piece REFERENCE DOC: BIFMA X5.1-2017 Section 5 Backrest Strength Test - Static- Type I Test Procedure: A force of 667N (150lbf) or 1001 N (225 lbf) shall be applied to the backrest at the backstop position for 0ne minute.

Angle 70 ± 10 degrees, If the backrest/tilt lock mechanism will not accept the load due to gradual silpping of the adjustment mechanism during the load application, set the backrest to its most rearward(stopped) position, then apply the specified load(s).

Remove the load Section 6 Backrest Strength Test - Static- Type II & III Test Procedure: S

Automatic | Applications and Buyer Notes

Automatic is organized as a sourcing-ready Moisture Analyzers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time ques

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Moisture AnalyzersBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryMoisture Analyzers
Unitset

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

LabInstSource related sourcing paths

Related applications LabInstSource related paths

Quality Control Labs

Pharma and Biotech Testing

Materials and Industrial Analysis

Related solutions LabInstSource related paths

Cleanroom Monitoring and Supplies

LabInstSource procurement phrases

LabInstSource related product samples